news center

Six criteria for judging the quality of ordinary plastic molds

Posted by: Koer    Time:3/19/2022 11:54:32 AM

Plastic molds have become the most widely used materials in various fields. Plastic molds have always served the market with an excellent reputation. The quality of injection molds is mainly reflected in six aspects. What are the six aspects? Next, the editor of the plastic mold manufacturer will give you a detailed introduction. The specific content is as follows:

1. Service life: under the premise of ensuring product quality, the number of working cycles that the mold can complete or the number of parts produced.

2. Designation and hardness: All front and rear internal molds, inserts, rows, slanted tops, vertical tops (push blocks), etc. must be processed on the bottom or side of the waist-shaped pit, and the material name and hardness must be engraved. Protect cost, cycle time, etc.

3. Product quality: product dimensional stability, compliance, product surface finish, product data utilization, etc.

4. The use and protection of the mold: whether it is the most convenient to use, demould, and the production support time should be as short as possible;

5. Protect the surface of the plastic mold: During the manufacturing process, the outer surface of the mold blank needs to be protected to prevent rust and scratches.

6. Spray anti-rust agent: Before packing the mold, it is necessary to spray white/or colorless anti-rust agent to the inner mold. All mold surfaces must be cleaned and then buttered.

— Related News —

Not only molds, but also the guarantee of rapid mass production of products

Copyright © 2022 All Rights Reserved


Some pictures on this site come from the Internet. If there are copyright issues,
please notify the deletion according to the contact information published on the website.